September 27, 2022

People have been making and using soaps for decades of years through different methods, you imagine a day in your life without soap?

Soap plays such basic roles that are hard to ignore in our everyday lives. Everybody uses soap; both rich and poor people. No matter its size, form (solid or liquid), scent, colour or price in the market, all soaps are made to help us do three very important things: bathe our bodies, wash clothes and clean anything!

In a continent with over one billion people and the fastest population growth rate in the world, Africans buy millions of soap bars every day.

Materials and Equipment

The material and equipment list for white wood ash soap is a short and simple one. First, uncontaminated white wood ashes from a hardwood tree are needed. Next, a fat or some oil is needed along with a container of clean, soft water. A small amount of salt is also helpful if it is available. An optional ingredient, for the survivalist, is a few small pieces of charcoal for the abrasive qualities that will aid in cleaning. Finally, a metal or wood container like a pot or pan will be used for the purpose of blending the materials together. Heat, straining methods, molding, and drying methods may be implemented, additionally.

Types of Oils

The type of oil or fat that is used has a significant and direct influence on the finished characteristics and qualities of the soap product. Some fats and oil are better for bubbles and others are better for cleaners. It’s wise to consider the main purpose of the soap before selecting the additive in this step. Some fine examples of fats and oils that are suited for the traditional soap making process are: neem, coconut, tallow, palm oil, palm kernel, ground pea nut, shea butter, and cocoa butter. The palm kernel and coconut oils are fantastic choices for soapy bubbles, while the neem oil is good for an antiseptic.

The Process

The initial step for making soap involves making lye water, which is accomplished by pouring boiling soft water over cooled, white hard wood ashes. Then the mixture needs to cure overnight or for a half day, in a container that has closeable holes in the bottom. Next, the water needs to be drained into a separate container and then filtered again through the ashes several times by draining through the bottom of the container. An old method used to test the strength of the lye water that still works well, is to take an egg and see if half of it floats in the water mixture. This indicates the right strength of the solution. It is very important to protect your hands, skin, and eyes during the remaining steps because lye is a corrosive base or alkali that can cause burns.

The oil or grease gets added next and it needs to be melted and strained through cheese cloth into cold water. Once a hard block is formed in the water, this step is complete. Heating the lye water and adding the block of grease or oil comes next until white bubbles start popping on top of the surface. Salt added to the cooling mixture will allow the soap to float to the top and then it can be collected.

Re-melting is used to refine the soap and provides the necessary opportunity to add perfume and/or color. A wooden container, lined with a wet cloth, works well for a mold but it ideally should have removable sides for easy access. The freshly poured soap should sit for a day and then it can be removed or carefully broken out of its mold. The soap is still slightly corrosive at this stage, so protective equipment should be worn. The bars can now be cut into smaller pieces with wire and stack in a dark, cool environment for drying. A month of time is required to get properly dried and cured soap. A wax or greasy paper can be used for a decorative wrapping for safe keeping or for resale.

Perfuming and Colors

When traditional soap is being made into the typical bars, perfumes and/or color can be added during the latter stages of melting. Right before the final product is poured into a mold, fragrant flowers and plants can be added to the grease mix and then boiled for an hour or so. Essential oils can also be used. The mixture can then be allowed to harden and it can later be melted back down. Once a liquid again, the scented plant or flower media can be strained out so that just the scent remains. Color can be added at this point as well – commercially-made dyes and pigments are the easiest way to add color.

Traditional soap making can be an essential survival task in the wilderness or a business venture in a more controlled environment. The process, in either case, can be hazardous to the user at various stages in the development. The end result is both rewarding and useful and an experienced soap maker can create exactly the finished product that has the characteristics that they seek.

If you appreciate the value of soap in our daily lives and how much money people spend on soap everyday, you would realize there’s a huge potential in the soap business.

With your new knowledge and skill, you could focus on producing ordinary and cheap bar soaps for laundry, washing and cleaning.

On the other hand, you could explore different colours, scents and herbs to produce exotic and special soaps for discerning customers.

It’s also important to consider the tastes, preferences and demand of your local market.

Some people (especially the poor) are mainly concerned about price and will be interested in a soap that is cheap, yet effective. For other discerning consumers, the shape, packaging, fragrance, colour and size will usually determine what soaps they buy.

With your creativity, you could appeal to and win a sufficiently large base of loyal customers who may like your soap for its uniqueness.

You could also get some tips on how to find customers for your business below

How to Expand Yourself Business as a Freelancer

Use google enhanced tool to find post via abujarock.com

Leave a Reply